|
Hardness |
Hardness range 41 - 47 HRC |
|
Impact toughness |
|
Test temperature ºF 68
Impact energy, Charpy-V-test
for plate, direction; Guaranteed minimum Ft. lbs. 14 |
|
|
Milling |
At cutting speed of 140m/mm,
feed 0.15mm and 10min effective machining time using Sandvik Coromil 200
and inserts GC 1025, we guarantee maximum edge wear of 0.3mm |
|
Etching |
Toolox 44 fulfills the etching
requirements of NADCA 207-2003 |
|
Dimensions |
Toolox 44 is supplied as plate
in thickness between .200" - 5 1/8" |
|
Heat treatment |
Toolox 44 is not intended for
further heat treatments. If Toolox 44 is heated above 590º C, no
guarantees for the properties of the steel can be given. |
|
Nitriding/coating |
Below temperature <590º C /
1094 ºF |
