GRAPHIC: Link to International Mold Steel welcome page.
CONTACT US  
800.625.6653  
 
Home | About Us | What's New | Webinars | Videos | Contact Us
 

HOME --> RUBBER MOLD STEELS --> PX5

Rubber Mold Steels

PX5

PX5 is a modified P20, high performance, high precision, mold steel. Applications include:

  • plastic molds
  • rubber molds
  • press platens
  • dies

Features:

  • Machines 30- to 40 percent faster than P20
  • Pre-hardened to 29-33 HRC
  • Uniform microstructure & hardness with extremely improved machined surface finish
  • Never needs stress relieving
  • Improved weldability and greatly reduced susceptibility to weld cracking
  • Reduced surface-hardened layer in EDM making finishing operations easier


All technical and engineering data and suggested procedures, specifications and applications contained in this publication are for general information only. Daido Steel, International Mold Steel and/or their distributors disclaim any and all express or implied warranties of merchantability, suitability for any particular purpose or use, or freedom from infringement of any patent, trademark or copyright. PX5 is a registered trademark of International Mold Steel, Inc. and Daido Steel Limited.

 

PX5

Products

Unique Characteristics

Savings Calculator

Benefits

Mechanical Properties

Physical Properties

General Design Guidelines

Processing Guidelines

Technical Center

 

 
 
  International Mold Steel, Inc. 
6796 Powerline Drive 
Florence, KY 41042 USA 
Toll Free: 800.625.6653
Tel: 859.342.6000
Fax: 859.342.6006
Sales E-mail: salesdesk@imsteel.com
Literature E-mail: info@imsteel.com
Web: www.imsteel.com


www.imsteel.com