HOME --> PLASTIC MOLD STEELS --> NAK80 --> MECHANICAL PROPERTIES

Plastic Mold Steels NAK80 Mechanical Properties: Tensile Strength 183,400 psi Yield Strength (.2% offset, 41 HRc) 147,600 psi Reduction of Area 41.9% Elongation in 2" (longitudinal) 16.1% Modulus of Elasticity (room temp.) 30.0 x 10-6 psi Charpy V-notch Impact Strength (toughness):   Longitudinal 8.1 ft/lb Transverse 8.5 ft/lb. Hardness 40 HRc All technical and engineering data and suggested procedures, specifications and applications contained in this publication are for general information only. Daido Steel, International Mold Steel and/or their distributors disclaim any and all express or implied warranties of merchantability, suitability for any particular purpose or use, or freedom from infringement of any patent, trademark or copyright. NAK80® is a registered trademark of International Mold Steel, Inc. and Daido Steel Limited.

NAK80 Products Recommended Reading Unique Characteristics Benefits Typical Chemistry Mechanical Properties Physical Properties General Design Guidelines Processing Guidelines Welding Guidelines Technical Center Sustainability