Rubber Show 2019
Booth #1332
Click here for more information.
|
Amerimold
Booth #1313
Click here for more information.
|
International Mold Steel is now ISO 9001:2015!
Click here for more information.
|
 New
stainless mold base steel offers high machinability and improved
thermal conductivity
Industeel ArcelorMittal has developed an original patented
free-machining martensitic stainless steel called SuperPlast
Stainless (SPS), that has seen good success in the marketplace
among mold base manufacturers. Mold bases manufactured with SPS
offer high machinability to provide both high productivity and
longer tool life, thus reducing costs.
READ MORE |
“Toolox is actually well suited for
everything,” says Tony Bäckman, the owner of ToBe Teknik, “but we
consider it most beneficial in the production of reinforced
materials that cause heavier wear on the moulds than other
plastics.”
READ MORE |
 |
Cutting Tool Costs
"We used Toolox 44 as somewhat of a last attempt to repair
the die and make it last longer/' he says. It was a
success. With the A2 and D2 tool steels, we were getting
probably 10,000 to 15,000 hits before the die broke. With
the Toolox 44, we did 254,000 hits on the die insert."
READ MORE |
|
 |
The
Solution for a Discerning Market
Read how Spanish company Metalurgicas ARNAL used Toolox to
cut costs by reducing processing times.
READ MORE |
|
|
|
Metal Forming Magazine, April 2008
Stamper Replaces Carbide Tooling with Coated DC53 |
Why 8%
Chrome Cold Work Die Steels are the Fastest Growing Tool
Steels
Thomas Schade Vice President, International Mold Steel,
Inc.
|
TOOLING:
Solutions Start in the Mold
 |
By: Michelle Maniscalco
NPE Issue 2006
READ MORE
|
Injection Molding Magazine 2006 NPE Issue |
|
What You Should Consider
When Purchasing P20 Steel
Moldmaking Technology Magazine
November, 2004 |
When buying
P20 steels, moldmakers should be aware of the variations
and key issues that affect delivery, cost and leadtimes.
READ MORE
Click here for a
PDF version
|
|
High-performance coating helps stamper fight downtime
Reprinted with permission from The Croydon
Group, Ltd., December 7, 2004.
Dies last longer, need no regrinding
READ
MORE
Click here for a
PDF version of this article for a print-friendly version. |
|
New CrN Tool Coatings Keep Going and Going and Going…
Metal Forming Magazine, July 2003
READ MORE
Click here for a
PDF version of this article for a print-friendly version. |
Matrix High-Speed Steels -- Economical Alternative to Powders
Metal Forming Magazine, May 2004.
READ MORE
Click here for a
PDF version of this article for a print-friendly version. |
Steel
Selection – Closing the Gap with Offshore Tooling
 |
The most discussed topic in
the mold building industry today is cheaper tooling from
offshore competition.
READ MORE |
Click here for a
PDF version of this article for a print-friendly
version. |
|
Pre-Hardened
Tool Steel Saves Time and Money
 |
Using NAK 55 standard mold
bases allows moldmakers to focus on crucial core and
cavity work.
READ MORE |
Click here for
the PDF
version of this article for a print-friendly version. |
|
Is It Tough
Enough for You? Can a new tool steel that machines like butter really be tough
enough to withstand the pounding that a Tier One automotive
stamping plant will put it through? We ask an "old D-2 boy"
what he thinks.
READ MORE
Click here for a
PDF version of this article. |
High-Performance Mold Steel Article provided with permission from Makino, Inc. The
complete article is available on their
Web site. at
www.moldmakermag.com
Prehardened Mold Steels offer Machinability and Weldability |
